| The PaQ 4U-550 comes with three self-adhesive feet made from dense acoustic foam. All the pieces are 35mm wide and 25mm high: one (the long one) is 170 mm long; the other two (the short ones) are 100mm long.
In MidiTower mode the base of the Case is one of the 177mm x 550mm faces: the long foot should be stuck across the base at the front about 25mm back from the 177mm edge; and the short feet should run along the 550mm edges, one either side of the base, starting from the back.
In DeskTop mode the base is the 438mm x 550 mm face opposite the Side Access Panel. In this case the long foot should be stuck to the middle of the 438mm edge at the back, and the two short feet should run along the 550 mm edges, one on either side of the base, starting about 25mm back from the front edge.
In RackMount mode the feet are not required, of course. |
